Custom Men's 7 Pocket Grid-Knit Half Tights with Dual Phone Pockets

Model: hc2026093022

Item specifics

Product Type: Men's compression half tights, mid-thigh

Main Fabric: Single-layer grid-knit fabric

Fabric Composition: 69% nylon, 31% spandex

Fit: Compression fit, mid rise at the natural waist

Waistband: Flat elastic waistband with a woven drawstring

Pocket Layout: Seven pockets: 4 gel pockets, 3 phone pockets including 1 rear zip pocket

Key Structure: Grid-knit face texture, flatlock seams, bound leg hems, no inner liner

Branding: Woven brand label at the lower left leg, woven drawstring tape

Colourway: Charcoal grey and deep green

Fabric / Development Options: Alternative knit gauges, contrast panel blocking, print and gradient options

Customization: Colourway, pocket count and placement, drawstring tape, branding placement

Service: OEM / ODM / Private Label

Review

Description

Custom Men's 7 Pocket Grid-Knit Half Tights with Dual Phone Pockets

These custom men's 7 pocket half tights are a mid-thigh compression short built from a grid-knit fabric supplied in charcoal grey and deep green. The face carries a visible waffle grid, and flatlock seams keep the leg panels flat under a race belt or an outer short. Storage is the headline: four gel pockets, three phone pockets and one secure rear zip pocket. A flat drawstring waistband with a woven tape label holds the fit. Sized for marathon, road and endurance programmes.

Seven-pocket layout: four gel pockets, three phone pockets, one rear zip.
Grid-knit face with a visible waffle grid texture.
Flatlock seams and bound leg hems keep the panel edge flat.
Flat drawstring waistband with a woven tape label.
Mid-thigh half-tight length, no inner liner.
Two colourways: charcoal grey plus a deep green option.
Woven brand label at the lower left leg.

Product Specification

Product Type	Men's compression half tights, mid-thigh
Main Fabric	Single-layer grid-knit fabric
Fabric Composition	69% nylon, 31% spandex (reference specification)
Fit	Compression fit, mid rise at the natural waist
Key Structure	Grid-knit face, flatlock seams, bound hems; seven-pocket layout; no inner liner
Feature	Seven-pocket storage system with a grid-knit face and no inner liner
Use Scenario	Marathon, road running, race day and endurance training
Development Options	Alternative knit gauges, contrast panel blocking, print and gradient options
Customization	Colourway, pocket count and placement, drawstring tape and branding placement
Logo & Label	Woven or printed leg label; woven drawstring tape; printed waistband label
Development Route	OEM, ODM and private label
MOQ	100 pcs
Sample Development	Depends on fabric availability, pattern work, branding method, fit adjustment and revision rounds.
Bulk Production	Planned after sample approval and confirmation of fabric, trims, measurements, packaging and QC requirements.

Development & Customization Notes

Product Development

Development starts from the confirmed seven-pocket layout and the grid-knit face, which gives the leg panel a visible waffle texture. Buyers can raise or lower the pocket count, move the rear zip pocket, change the knit gauge or add contrast blocking to a side panel. There is no inner liner, so the block stays single layer and the pattern can be adjusted without re-cutting a liner.

Sample Development Notes

Sample rounds should confirm pocket depth and placement against real phone and gel sizes, the drawstring tape print, and how the grid-knit face behaves after washing. The reference specification states 69% nylon, 31% spandex, so any yarn substitution changes how the fabric recovers and must be re-tested in the same round. Two to three rounds are typical before bulk approval.

OEM / ODM / Private Label

OEM: build to your tech pack on the confirmed seven-pocket half-tight block. ODM: take this grid-knit silhouette and pocket system into your own range, including colourway and contrast blocking. Private label: add your leg label, woven drawstring tape, waistband label and packaging. MOQ is 100 pcs per style, with colourway, branding and pocket configuration fixed before sampling.

Best for

Best suited to running and endurance labels that sell storage as the main buying reason, and to gym or functional-training brands that want a compression short without a built-in liner. The two colourways let a brand open a charcoal-black core and a deeper seasonal green from one block. Also relevant for race-day ranges where phone and gel carry decide the purchase.

Private Label Development Notes

Private label runs keep the confirmed construction and change only brand-facing parts: leg label, drawstring tape, waistband label, packaging and colourway. Deep green and charcoal grey need separate dye lots and should be matched against a physical standard. Pocket count and the rear zip position stay as agreed at sampling, because moving them changes the panel seams and the pattern cut.

Send your tech pack or reference