Custom Men's Compression Half Tights with Silicone Grippers and Waistband Pocket
- Model
- hc2026093024
Item specifics
- Product Type
- Men's compression half tights, mid-thigh
- Main Fabric
- Single-layer knit with silicone leg grippers
- Fabric Composition
- 92% polyester, 8% spandex
- Fit
- Compression fit, mid-to-high rise at the natural waist
- Waistband
- Wide elastic waistband with utility loops and a waxed drawstring
- Pocket Layout
- Hip side pockets plus one rear waistband zip pocket for valuables
- Key Structure
- Gusseted front crotch, silicone leg grippers, reflective hem strips, flatlock seams
- Branding
- Reflective vertical leg print, woven drawstring tape
- Colourway
- Black
- Fabric / Development Options
- Alternative knit gauges, matte or brushed finishes, contrast panel blocking
- Customization
- Colourway, waistband depth and loop design, pocket layout, gripper and reflective placement
- Service
- OEM / ODM / Private Label
Review
Description
These custom men's compression half tights are a mid-thigh training short in black, built as a single layer with no inner liner. A wide elastic waistband carries utility loops and a wax-dipped drawstring, and a rear zip pocket at the waistband holds keys or a card. Hip side pockets take a phone or gels, silicone leg grippers hold the hem in place and reflective strips lift visibility on low-light runs. The reference specification states 92% polyester, 8% spandex. Built for running and gym programmes. Development starts from the confirmed waistband assembly: a wide elastic band with utility loops, a wax-dipped drawstring and an integrated rear zip pocket. Buyers can change loop count and spacing, move the rear zip pocket, deepen the hip pockets or reset gripper coverage at the hem. Because the style is single layer, the pattern can be re-graded without touching a liner. Sample rounds should test waistband structure under load, the drawstring tip finish, and how the silicone grippers sit after repeated wear and washing. Hip and rear pocket depths need sign-off against real phone, card and gel samples. The reference specification states 92% polyester, 8% spandex; substitute yarns change how the grippers bond to the hem and must be re-tested. Two to three rounds are typical. OEM: build to your tech pack on the confirmed utility-waistband half-tight block. ODM: adapt this style and its pocket system into your own running or training range. Private label: apply your logo, reflective print, woven labels, packaging and colourway. MOQ is 100 pcs per style, with waistband design, pocket layout and branding method fixed before sampling. Best for running and gym brands that need a compression half tight with real carry capacity and a waistband that reads as technical. Also suited to hybrid labels selling one product for road runs and strength sessions, and to reflective-visibility ranges for early morning and evening training. The single-layer build keeps the price architecture simpler than a lined short. Private label runs keep the confirmed waistband assembly and change only brand-facing parts: reflective leg print, woven labels, drawstring tape, packaging and colourway. Gripper coverage and waistband depth should stay as agreed at sampling so hem behaviour does not change between repeat orders. Reflective print placement belongs to the pattern, not to a later decoration step.Custom Men's Compression Half Tights with Silicone Grippers and Waistband Pocket
Product Specification
Product Type Men's compression half tights, mid-thigh Main Fabric Single-layer knit with silicone leg grippers Fabric Composition 92% polyester, 8% spandex (reference specification) Fit Compression fit, mid-to-high rise at the natural waist Key Structure Gusseted front crotch, silicone grippers, reflective hem strips, flatlock seams; hip and waistband pockets Feature Utility-loop waistband with a waxed drawstring and a rear zip pocket Use Scenario Road running, HIIT, strength training and gym sessions Development Options Alternative knit gauges, matte or brushed finishes and contrast panel blocking Customization Colourway, waistband depth and loop design, pocket layout, gripper and reflective placement Logo & Label Reflective printed or heat-transfer leg logo; woven drawstring tape; printed waistband label Development Route OEM, ODM and private label MOQ 100 pcs Sample Development Depends on fabric availability, pattern work, branding method, fit adjustment and revision rounds. Bulk Production Planned after sample approval and confirmation of fabric, trims, measurements, packaging and QC requirements. Development & Customization Notes
Product Development
Sample Development Notes
OEM / ODM / Private Label
Best for
Private Label Development Notes
