Custom Men's 2-in-1 Running Shorts with Full Compression Liner and Storage

Model: hc2026093025

Item specifics

Product Type: Men's 2-in-1 running shorts with a built-in liner short, mid-thigh

Main Fabric: Woven dot-grid mesh outer with a built-in liner short

Fabric Composition: 85% polyester, 15% spandex

Fit: Relaxed outer fit over a compression liner, mid rise

Waistband: Wide flat two-tone elastic waistband with a perforated mesh face

Pocket Layout: Eight pockets: 4 gel, 3 phone including 1 zip pocket, 1 key pocket

Liner: Full built-in compression liner short

Key Structure: Asymmetric drop hem, liner side vent slit, flatlock seams

Branding: Reflective-style printed wordmark at the outer left hem, back waistband tab

Colourway: Lagoon multi: light blue with a white to yellow gradient

Fabric / Development Options: Alternative mesh gauges, gradient artwork direction, contrast waistband options

Customization: Colourway, gradient artwork, liner colour, pocket layout, branding placement

Service: OEM / ODM / Private Label

Review

Description

Custom Men's 2-in-1 Running Shorts with Full Compression Liner and Eight-Pocket Storage

These custom men's 2-in-1 running shorts pair a light lagoon blue mesh outer with a full built-in compression liner short. The outer sits relaxed with an asymmetric drop hem and a white-to-yellow gradient running across the front and back panels, while the liner holds a close fit and carries a side vent slit at the hem. Storage totals eight pockets: four gel, three phone including one zip, and one key. The reference specification states 85% polyester, 15% spandex. Made for road running and race day.

Full built-in compression liner short with a hem vent slit.
Eight-pocket storage: four gel, three phone and one key pocket.
Wide two-tone waistband with a perforated mesh face.
Asymmetric drop hem on the outer short.
White-to-yellow gradient print across the front and back panels.
Reflective-style wordmark print at the outer left hem.
Lagoon blue colourway with a mint liner and waistband.

Product Specification

Product Type	Men's 2-in-1 running shorts with a built-in liner short, mid-thigh
Main Fabric	Woven dot-grid mesh outer with a built-in liner short
Fabric Composition	85% polyester, 15% spandex (reference specification)
Fit	Relaxed outer fit over a compression liner, mid rise
Key Structure	Asymmetric drop hem, liner side vent slit, flatlock seams; eight-pocket layout
Feature	Full built-in liner short with an asymmetric drop hem and eight pockets
Use Scenario	Road running, marathon, race day and endurance training
Development Options	Alternative mesh gauges, gradient artwork direction and contrast waistband options
Customization	Colourway, gradient artwork, liner colour, pocket layout and branding placement
Logo & Label	Printed or heat-transfer hem print; woven or printed waistband tab
Development Route	OEM, ODM and private label
MOQ	100 pcs
Sample Development	Depends on fabric availability, pattern work, branding method, fit adjustment and revision rounds.
Bulk Production	Planned after sample approval and confirmation of fabric, trims, measurements, packaging and QC requirements.

Development & Customization Notes

Product Development

Development starts from the confirmed two-piece block: a relaxed mesh outer cut over a full compression liner short. Buyers can change gradient artwork and direction, liner colour, drop-hem depth and pocket count without re-cutting the liner. Because the liner is a complete short rather than a brief, both layers are graded together at sampling and the liner leg opening should stay inside the outer hem.

Sample Development Notes

Sample rounds should confirm the liner leg opening against the outer hem, vent slit position, pocket depth for phone and gel sizes, and how the gradient print holds after washing. The reference specification states 85% polyester, 15% spandex, so any yarn or mesh substitution must be re-tested in the same round. Waistband height and the perforated mesh face are part of the fit sign-off. Two to three rounds are typical.

OEM / ODM / Private Label

OEM: build to your tech pack on the confirmed 2-in-1 block, outer plus liner. ODM: take this gradient mesh short and its pocket system into your own running range. Private label: apply your logo, hem print, waistband tab, woven labels and packaging. MOQ is 100 pcs per style, with colourway, gradient artwork, liner colour and pocket layout fixed before sampling.

Best for

Best for road running and race-day collections where a liner is expected and storage is part of the purchase decision. Also suited to brands building a gradient-print story across a season, and to gym or hybrid labels that want one short for runs and training days. The two-tone waistband and contrasting liner give the style a coordinated colour story for range building.

Private Label Development Notes

Private label runs keep the confirmed outer-plus-liner construction and change brand-facing parts: hem print, waistband tab, woven labels, packaging, colourway and gradient artwork. Gradient direction and print scale should be fixed against a physical strike-off before bulk, because the panel layout changes how the artwork reads. Pocket count and zip position stay as agreed at sampling.

Send your tech pack or reference