Custom Men's Two-Tone 2-in-1 Run Shorts with Zip Back Pocket and Liner

Model: hc2026093026

Item specifics

Product Type: Men's 2-in-1 running shorts with a built-in liner short, mid-thigh

Main Fabric: Woven dot-grid mesh outer with a built-in liner short

Fabric Composition: 85% polyester, 15% spandex

Fit: Relaxed outer fit over a compression liner, mid rise

Waistband: Wide flat two-tone elastic waistband with a perforated mesh face

Pocket Layout: Eight pockets: 4 gel, 3 phone including 1 zip back pocket, 1 key pocket

Liner: Full built-in compression liner short in black

Key Structure: Asymmetric drop hem, liner side vent slit, zip back pocket, flatlock seams

Branding: Vertical printed wordmark at the outer left hem, back waistband label tab

Colourway: Slate multi: white to slate grey gradient with a black liner

Fabric / Development Options: Alternative mesh gauges, gradient artwork direction, contrast waistband options

Customization: Colourway, gradient artwork, liner colour, pocket layout, branding placement

Service: OEM / ODM / Private Label

Review

Description

Custom Men's Two-Tone 2-in-1 Run Shorts with Zip Back Pocket and Full Liner

These custom men's two-tone 2-in-1 run shorts combine a white-to-slate gradient mesh outer with a full built-in compression liner short in black. The outer carries a fine woven dot-grid texture, an asymmetric drop hem and a vertical wordmark at the left hem; the liner adds a side vent slit at the hem. A zip back pocket sits under the wide two-tone waistband alongside seven further pockets: four gel, three phone and one key. The reference specification states 85% polyester, 15% spandex. Built for marathon training blocks.

Full built-in black compression liner short with a hem vent slit.
Zip back pocket under the waistband for a phone or card.
Eight-pocket storage: four gel, three phone and one key pocket.
Woven dot-grid mesh outer with an asymmetric drop hem.
White-to-slate gradient across the front and back panels.
Wide two-tone waistband with a perforated mesh face.
Vertical wordmark print at the outer left hem.

Product Specification

Product Type	Men's 2-in-1 running shorts with a built-in liner short, mid-thigh
Main Fabric	Woven dot-grid mesh outer with a built-in liner short
Fabric Composition	85% polyester, 15% spandex (reference specification)
Fit	Relaxed outer fit over a compression liner, mid rise
Key Structure	Asymmetric drop hem, zip back pocket, liner side vent slit, flatlock seams; eight-pocket layout
Feature	Zip back pocket in the waistband with a full black liner short
Use Scenario	Marathon training, road running and endurance sessions
Development Options	Alternative mesh gauges, gradient artwork direction and contrast waistband options
Customization	Colourway, gradient artwork, liner colour, pocket layout and branding placement
Logo & Label	Printed or heat-transfer hem print; woven or printed waistband label tab
Development Route	OEM, ODM and private label
MOQ	100 pcs
Sample Development	Depends on fabric availability, pattern work, branding method, fit adjustment and revision rounds.
Bulk Production	Planned after sample approval and confirmation of fabric, trims, measurements, packaging and QC requirements.

Development & Customization Notes

Product Development

Development starts from the confirmed outer-plus-liner block and the gradient mesh panel. Buyers can move the gradient direction, swap the liner to a contrast or tonal colour, adjust the drop-hem depth and change the pocket count without re-cutting the liner. The zip back pocket is set into the waistband seam, so moving it changes the waistband pattern and should be fixed before sampling.

Sample Development Notes

Sample rounds should confirm the zip back pocket clearance for a phone, the liner leg opening against the outer hem, vent slit position and gradient print hold after washing. The reference specification states 85% polyester, 15% spandex, so any mesh or yarn substitution must be re-tested in the same round. Contrast between the gradient outer and the black liner is part of the colour sign-off. Two to three rounds are typical.

OEM / ODM / Private Label

OEM: build to your tech pack on the confirmed 2-in-1 block and its zip back pocket. ODM: take this gradient mesh short and its eight-pocket storage into your own running range. Private label: add your logo, hem print, waistband tab, woven labels and packaging. MOQ is 100 pcs per style, with colourway, gradient artwork, liner colour and zip position fixed before sampling.

Best for

Best for marathon and half-marathon training ranges where a liner and a secure phone pocket are both expected. Also suited to brands that want a light outer with a dark liner for a two-tone look, and to gym or hybrid labels selling one short across runs and training days. The zip back pocket positions the style for a higher price tier.

Private Label Development Notes

Private label runs keep the confirmed outer-plus-liner construction and change brand-facing parts: hem print, waistband tab, woven labels, packaging, colourway and gradient artwork. The zip puller, tab material and liner colour all form part of the private label specification. Pocket count and zip position stay as agreed at sampling because they change waistband seams and the pattern cut.

Send your tech pack or reference