Custom Men's Split Running Shorts with Bonded Hem Vents and Seven Pockets

Model: hc2026093027

Item specifics

Product Type: Men's split running shorts, mid-thigh

Main Fabric: Woven shell with an anti-chafe inner brief

Fabric Composition: 85% polyester, 15% spandex

Fit: Relaxed fit, mid rise at the natural waist

Waistband: Black two-tone mesh waistband with an internal drawcord

Pocket Layout: Seven pockets: 4 gel, 2 phone and 1 key pocket, plus a rear zip pocket

Liner: Built-in anti-chafe inner brief, not a full liner short

Key Structure: Bonded hem edge, vertical split vents on each outer leg, flatlock seams

Branding: Woven label tab at the back centre waistband

Colourway: Poppy multi: block-stripe print in poppy red, white and grey-mauve

Fabric / Development Options: Alternative print directions, colour-block panels, contrast waistband mesh

Customization: Colourway, print artwork, waistband colour, pocket layout, branding placement

Service: OEM / ODM / Private Label

Review

Description

Custom Men's Split Running Shorts with Bonded Hem Vents and Seven-Pocket Storage

These custom men's split running shorts are a mid-thigh style cut from a woven shell and finished with bonded edges at the hem. A black two-tone mesh waistband with an internal drawcord holds the fit, and a vertical split vent opens each outer leg for movement. Inside sits an anti-chafe inner brief instead of a full liner short. Storage runs to seven pockets: four gel, two phone and one key, plus a rear zip pocket. The reference specification states 85% polyester, 15% spandex.

Bonded hem edges with vertical split vents on each outer leg.
Seven pockets: four gel, two phone, one key and a rear zip pocket.
Black two-tone mesh waistband with an internal drawcord.
Anti-chafe inner brief instead of a full liner short.
Block-stripe print in poppy red, white and grey-mauve.
Woven label tab at the back centre waistband.
Mid-thigh split-short length for race-day movement.

Product Specification

Product Type	Men's split running shorts, mid-thigh
Main Fabric	Woven shell with an anti-chafe inner brief
Fabric Composition	85% polyester, 15% spandex (reference specification)
Fit	Relaxed fit, mid rise at the natural waist
Key Structure	Bonded hem edge, vertical split vents, flatlock seams; seven-pocket layout; anti-chafe inner brief
Feature	Bonded hem split vents with a seven-pocket layout and inner brief
Use Scenario	Race day, road running and short-distance training
Development Options	Alternative print directions, colour-block panels and contrast waistband mesh
Customization	Colourway, print artwork, waistband colour, pocket layout and branding placement
Logo & Label	Woven or printed waistband tab; printed or heat-transfer logo options
Development Route	OEM, ODM and private label
MOQ	100 pcs
Sample Development	Depends on fabric availability, pattern work, branding method, fit adjustment and revision rounds.
Bulk Production	Planned after sample approval and confirmation of fabric, trims, measurements, packaging and QC requirements.

Development & Customization Notes

Product Development

Development starts from the confirmed bonded hem and split-vent construction, which is what separates this style from a standard running short. Buyers can change the print scale and direction, recolour the mesh waistband, open the vent higher or lower, and reset the pocket count without changing the bonded edge process. The inner brief is a single layer, so the block stays light and quick to grade.

Sample Development Notes

Sample rounds should confirm bonded edge durability after repeated washing, split-vent height against stride, and pocket depth for phone and gel sizes. The reference specification states 85% polyester, 15% spandex, so any shell substitution must be re-tested with the same bonding parameters. Print registration across the block-stripe panels is part of the artwork sign-off. Two to three rounds are typical.

OEM / ODM / Private Label

OEM: build to your tech pack on the confirmed bonded split-short block. ODM: take this split-vent construction and pocket system into your own race-day range. Private label: apply your logo, waistband tab, woven labels, packaging and colourway. MOQ is 100 pcs per style, with print artwork, waistband colour, vent height and branding method fixed before sampling.

Best for

Best for race-day and short-distance running ranges where low weight and free leg movement matter, and for brands building a print-led story. Also suited to gym and hybrid labels that want a lighter alternative to a lined short. The anti-chafe brief keeps the style wearable without a full liner, which suits warmer-weather collections.

Private Label Development Notes

Private label runs keep the confirmed bonded split construction and change brand-facing parts: print artwork, waistband mesh colour, woven label tab, packaging and colourway. Because the print carries most of the visual identity, artwork scale and repeat should be fixed against a physical strike-off before bulk. Vent height and pocket count stay as agreed at sampling.

Send your tech pack or reference