Custom Men's Plaster Slate Gradient Split Shorts with Mesh Panels and Pockets
- Model
- hc2026093029
Item specifics
- Product Type
- Men's split running shorts, mid-thigh
- Main Fabric
- Open mesh grid shell with an anti-chafe inner brief
- Fabric Composition
- 85% polyester, 15% spandex
- Fit
- Slim athletic fit, mid rise at the natural waist
- Waistband
- Wide two-tone mesh waistband with an internal drawcord
- Pocket Layout
- Seven pockets: 4 gel, 2 phone and 1 key pocket, plus a rear zip pocket
- Liner
- Built-in anti-chafe inner brief, not a full liner short
- Key Structure
- Deep split vent on each outer leg, open mesh grid face, flat leg hem
- Branding
- Back waistband tab label, vertical hem logo at the side seam
- Colourway
- Plaster to slate: light greige at the waist fading to darker slate at the hem
- Fabric / Development Options
- Alternative mesh gauges, gradient depth and direction, contrast waistband colours
- Customization
- Colourway, gradient direction, waistband colour, pocket layout, branding placement
- Service
- OEM / ODM / Private Label
Review
Description
These custom men's gradient split shorts are a mid-thigh style in an open mesh grid fabric that fades from light plaster greige to a darker slate at the hem. A two-tone mesh waistband with an internal drawcord holds a slim athletic fit, and a deep split vent opens each outer leg. Inside sits a built-in anti-chafe inner brief rather than a full liner short. Seven pockets handle race-day storage: four gel, two phone and one key, plus a rear zip pocket. The reference specification states 85% polyester, 15% spandex. Development starts from the confirmed mesh split block and the neutral gradient direction, which is what positions this colourway for autumn and winter ranges rather than summer. Buyers can reset the fade depth, invert the gradient, recolour both waistband bands and adjust vent height without changing the pattern. Because the shell is a single open mesh layer over an inner brief, the block stays light and grades cleanly. Sample rounds should verify gradient read-out across the panel after washing, vent height against stride, hem logo placement and pocket depth for phone and gel sizes. The reference specification states 85% polyester, 15% spandex, so a shell substitution changes how the fade holds and must be re-tested in the same round. Waistband band contrast is part of the colour sign-off. Two to three rounds are typical. OEM: build to your tech pack on the confirmed mesh split-short block. ODM: take this neutral gradient direction and deep split vent into your own winter running range. Private label: apply your logo, waistband tab, hem logo, woven labels and packaging. MOQ is 100 pcs per style, with gradient direction, waistband colour, vent height and branding method fixed before sampling. Best for endurance and road-training ranges that need a split short in a quieter palette than a bright summer print, and for brands building a neutral autumn/winter story. Also suited to gym and hybrid labels that want a lighter alternative to a lined short. The greige and slate fade photographs well for lookbooks and range sheets. Private label runs keep the confirmed mesh shell and split vent and change brand-facing parts: gradient direction, waistband band colours, hem logo, woven labels, packaging and colourway. The neutral palette means colour tolerances should be agreed on a physical standard, because greige and slate read differently under studio and daylight. Vent height and pocket count stay as agreed at sampling.Custom Men's Plaster Slate Gradient Split Shorts with Mesh Panels and Pockets
Product Specification
Product Type Men's split running shorts, mid-thigh Main Fabric Open mesh grid shell with an anti-chafe inner brief Fabric Composition 85% polyester, 15% spandex (reference specification) Fit Slim athletic fit, mid rise at the natural waist Key Structure Deep split vent on each outer leg, open mesh grid face, flat hem; seven-pocket layout Feature Plaster-to-slate gradient with deep outer-leg split vents Use Scenario Endurance running, road training and race day Development Options Alternative mesh gauges, gradient depth and direction and contrast waistband colours Customization Colourway, gradient direction, waistband colour, pocket layout and branding placement Logo & Label Back waistband tab label; heat-transfer or reflective hem logo Development Route OEM, ODM and private label MOQ 100 pcs Sample Development Depends on fabric availability, pattern work, branding method, fit adjustment and revision rounds. Bulk Production Planned after sample approval and confirmation of fabric, trims, measurements, packaging and QC requirements. Development & Customization Notes
Product Development
Sample Development Notes
OEM / ODM / Private Label
Best for
Private Label Development Notes
