Custom Men's 9 Inch Running Half Tights with Silicone Grip Cuffs and Pocket
- Model
- hc2026093031
Item specifics
- Product Type
- Men's compression half tights, 9 inch / 22.86 cm inseam
- Main Fabric
- Knit fabric with internal silicone grip strips at the hem
- Fabric Composition
- 94% polyester, 6% spandex
- Fit
- Compression second-skin fit, mid rise at the natural waist
- Waistband
- Wide flat tonal elastic waistband without a drawcord
- Pocket Layout
- Dual side pockets, one rear waistband pocket and three gel pockets
- Key Structure
- Flat leg cuffs with internal silicone grip strips, flatlock seams, no liner
- Branding
- Vertical side panel logo print with a reflective finish
- Colourway
- Olive, with a black option from the same block
- Fabric / Development Options
- Alternative knit gauges, tonal or contrast side panels, print options
- Customization
- Colourway, inseam length, pocket layout, logo placement and grip coverage
- Service
- OEM / ODM / Private Label
Review
Description
These custom men's 9 inch running half tights are a compression second-skin short with a stated 22.86 cm inseam, cut with flat leg cuffs that carry internal silicone grip strips. A wide flat tonal waistband holds the fit without a drawcord, and a vertical logo runs down the side panel in a reflective print. Storage covers a phone, keys and gels: dual side pockets, one rear waistband pocket and three gel pockets. The reference specification states 94% polyester, 6% spandex. Supplied in olive with a black option. Development starts from the confirmed 9 inch inseam and the flat cuff with internal silicone grip strips, which is what keeps the hem in place through a stride. Buyers can shorten or lengthen the leg, reset grip coverage, move the side pocket opening and change the side panel to a contrast or tonal build. The block carries no liner and no vents, so the pattern stays simple and grades quickly across sizes. Sample rounds should confirm grip strip performance after repeated washing, side pocket depth for a phone, rear waistband pocket clearance for keys, and how the reflective side logo reads on the olive ground. The reference specification states 94% polyester, 6% spandex, so any yarn substitution changes grip bonding and must be re-tested. Two to three rounds are typical before bulk approval. OEM: build to your tech pack on the confirmed 9 inch half-tight block. ODM: take this inseam, pocket set and grip cuff into your own running range. Private label: apply your logo, reflective side print, woven labels, packaging and colourway. MOQ is 100 pcs per style, with inseam, grip coverage, pocket layout and branding method fixed before sampling. Best for running and endurance brands that sell a defined 9 inch half tight as part of a core range, and for labels that want the same block in olive and black without a second development cycle. Also suited to gym and hybrid ranges where a compression short doubles as a training layer. Reflective side branding fits early morning and evening training collections. Private label runs keep the confirmed 9 inch block, grip cuff and pocket set, and change brand-facing parts: side panel print, reflective treatment, woven labels, packaging and colourway. Grip coverage and cuff construction stay as agreed at sampling so hem behaviour does not shift between repeat orders. Olive and black need separate dye lots and should be matched to a physical standard.Custom Men's 9 Inch Running Half Tights with Silicone Grip Cuffs and Side Pockets
Product Specification
Product Type Men's compression half tights, 9 inch / 22.86 cm inseam Main Fabric Knit fabric with internal silicone grip strips at the hem Fabric Composition 94% polyester, 6% spandex (reference specification) Fit Compression second-skin fit, mid rise at the natural waist Key Structure Flat leg cuffs with internal silicone grip strips, flatlock seams; dual side and rear waistband pockets Feature 9 inch inseam with silicone grip cuffs and a reflective side logo Use Scenario Marathon, road running, race day and gym training Development Options Alternative knit gauges, tonal or contrast side panels and print options Customization Colourway, inseam length, pocket layout, logo placement and grip coverage Logo & Label Vertical side panel print, reflective or heat-transfer; woven or printed waistband label Development Route OEM, ODM and private label MOQ 100 pcs Sample Development Depends on fabric availability, pattern work, branding method, fit adjustment and revision rounds. Bulk Production Planned after sample approval and confirmation of fabric, trims, measurements, packaging and QC requirements. Development & Customization Notes
Product Development
Sample Development Notes
OEM / ODM / Private Label
Best for
Private Label Development Notes
